• No.101 Wanbo 1st Road, Nancun Town, Panyu District, Guangzhou, Guangdong, China
  • 0086-020-84886013，84886093，84886091，84886012
  • sales@finegosteel.com
facebooklinkedintwitteryoutubetiktokinstagram

Standard

ASME SA335/SA335M

Scope:

1.1 This specification 2 covers nominal (average) wall seamless alloy-steel pipe intended for high-temperature service.Pipe ordered to this specification shall be suitable for bending,flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.
1.2 Several grades of ferritic steels (Note 1) are covered.Their compositions are given in Table 1.
NOTE 1—Ferritic steels in this specification are defined as low and intermediate-alloy steels containing up to and including 10 % chromium.
1.3 Supplementary requirements (S1 to S7) of an optional nature are provided. These supplementary requirements call for additional tests to be made, and when desired, shall be so stated in the order together with the number of such tests required.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
NOTE 2—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”


Size Range:

Outer Diameter: 1/8″-48″

Wall Thickness Schedule: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH

Lengths:

Fixed length within the random lengths range

Tolerances on fixed lengths: +10/-0mm, for boiler tube and +50/-0mm for header pipe.

Maximum length up to 24mtr


Steel Grade:

P1 boiler tube for boiler replacement and repair

P5 boiler tube for petroleum

P9 boiler tube for petroleum

P11  boiler tube for power generation, petroleum, and other high temperature services

P22  boiler tube for power generation, petroleum, and other high temperature services

P91  boiler tube  for power generation


Surface Conditions:

Mill Lacquered

Galvanized

Bare


End Finishes:

Beveled

Square

Threaded

Threaded and Coupled

Grooved


Protection:

Unprotected

If requird, the tubes can be delivered with plastic caps at both ends

Protection for sea transport on request


Chemical Composition:

Grade

Chemical Composition

C

Mn

P max

S max

Si

Cr

Mo

V

N

Others

P1

0.1-0.2

0.3-0.8

0.025

0.025

0.1-0.5

1.0-1.5

0.44-0.65

/

/

/

P2

0.1-0.2

0.3-0.61

0.025

0.025

0.1-0.3

0.5-0.81

0.44-0.65

/

/

/

P5

≤0.15

0.3-0.6

0.025

0.025

≤0.5

4.0-6.0

0.45-0.65

/

/

/

P5b

≤0.15

0.3-0.6

0.025

0.025

1.0-2.0

4.0-6.0

0.45-0.65

/

/

/

P5c

≤0.12

0.3-0.6

0.025

0.025

≤0.5

4.0-6.0

0.45-0.65

/

/

/

P9

≤0.15

0.3-0.6

0.025

0.025

0.25-1.0

8.0-10.0

0.9-1.1

/

/

/

P11

0.05-0.15

0.3-0.6

0.025

0.025

0.5-1.0

1.0-1.5

0.44-0.65

/

/

/

P12

0.05-0.15

0.3-0.61

0.025

0.025

≤0.5

0.8-1.25

0.44-0.65

/

/

/

P15

0.05-0.15

0.3-0.6

0.025

0.025

1.15-1.65

/

0.44-0.65

/

/

/

P21

0.05-0.15

0.3-0.6

0.025

0.025

≤0.5

2.65-3.35

0.8-1.06

/

/

/

P22

0.05-0.15

0.3-0.6

0.025

0.025

≤0.5

1.9-2.6

0.87-1.13

/

/

/

P23

0.04-0.1

0.1-0.6

0.03

0.01

≤0.5

1.9-2.6

0.05-0.3

0.2-0.3

≤0.015

Cb(0.02-0.08) ,B(0.001-0.006)

Al(≤0.03), W(1.45-1.75)

Ni(≤0.4), Ti(0.005-0.060)

P24

0.05-0.1

0.3-0.7

0.02

0.01

0.15-0.45

2.2-2.6

0.9-1.1

0.2-0.3

≤0.012

Ti(0.06-0.1), Al(≤0.02)

B(0.0015-0.007)

P36

0.1-0.17

0.8-1.2

0.03

0.025

0.25-0.50

≤0.30

0.25-0.50

≤0.02

≤0.02

Ni(1.0-1.3), Cu(0.5-0.8)

Cb(0.015-0.045), Al(≤0.050)

P91

0.08-0.12

0.3-0.6

0.02

0.01

0.2-0.5

8.0-9.5

0.85-1.05

0.18-0.25

0.03-0.07

Ni(≤0.4), Al(≤0.02), Cb(0.06-0.1)

Ti(≤0.01), Zr(≤0.01)

P92

0.07-0.13

0.3-0.6

0.02

0.01

≤0.50

8.5-9.5

0.3-0.6

0.15-0.25

0.03-0.07

Ni(≤0.4), AL(≤0.02), Cb(0.04-0.09)

W(1.5-2.0), B(0.001-0.006)

Ti(≤0.01), Zr(≤0.01)

P122

0.07-0.14

≤0.7

0.02

0.01

≤0.50

10.0-11.5

0.25-0.6

0.15-0.3

0.04-0.1

Ni(≤0.5), Al(≤0.02), Ti(≤0.01)

W(1.5-2.5), Cu(0.3-1.7), Zr(≤0.01)

Cb(0.04-0.1), B(0.0005-0.005)

P911

0.09-0.13

0.3-0.6

0.02

0.01

0.1-0.5

8.5-9.5

0.9-1.1

0.18-0.25

0.04-0.09

Ni(≤0.4), Cb(0.06-0.1)

B(0.0003-0.006),Al(≤0.02)

W(0.9-1.1),Ti(≤0.01),Zr(≤0.01)

You are welcome to leave us a message

facebooklinkedintwitteryoutubetiktok
  • No.101 Wanbo 1st Road, Nancun Town, Panyu District, Guangzhou, Guangdong, China
  • 0086-020-84886013，84886093，84886091，84886012
  • sales@finegosteel.com
We use cookies and other tracking technologies to improve your browsing experience on our website, to show you personalized content and targeted ads, to analyze our website traffic, and to understand where our visitors are coming from,This behavior is in compliance with the user consent policy.
Accept
Decline